How To Use Inurs INO3-A01 In Different Places
The ozone concentration of this machine is within the national safety range (≤0.08ppm), please rest assured to use it.
School: It is recommended that the equipment be installed at a height of 2 meters and the mode is selected as OZ1, that is, continuous negative oxygen ion + active oxygen + ultraviolet intermittent operation.
Hotel guest rooms: It is recommended to use it with a lampshade, and the mode is OZ1, that is, continuous negative oxygen ion + active oxygen + ultraviolet intermittent operation.
Family: Put the device on the table and keep more than 0.5 meters from people.
Household toilet: please place it on top of the toilet cabinet with a height of about 1.5 meters.
Home bedroom: Please select the ION mode to release negative oxygen ions; when you need to sterilize and remove odors, you can switch to the strong mode, that is, the OZ1 mode.
Car/bus: Please select intermittent mode OZ2.
Guidelines for the applicable area of this equipment: ION gear on the leftmost side of the open button ≤5 square meters; OZ2 gear on the rightmost side of the open button on 5 square meters -15 square meters; OZ1 gear in the middle of the open button on 15-30 square meters.
If it is wall-mounted, please try to install it between 1 meter and 1.8 meters in height.
When using the equipment, please keep more than 1 meter away from plants and more than 0.5 meters away from people.
When using the equipment, please do not look directly at the ultraviolet light for a long time; please turn off the power switch if you do not use it for a long time.
If possible, the equipment can be installed near the exhaust outlet, and the air disinfection and purification effect will be better.
Maintenance items: This machine does not need to replace the filter material. If the negative oxygen ion output port is stained, please wipe it regularly with a regular cotton swab.